connection_table.py

from labscript import *
from labscript_devices.DummyPseudoclock.labscript_devices import DummyPseudoclock
from labscript_devices.DummyIntermediateDevice import DummyIntermediateDevice
import sys, os
from labscript import start, stop, add_time_marker, AnalogOut, DigitalOut, ClockLine
from labscriptlib.example_apparatus import *

from user_devices.UM.labscript_devices import UM
from user_devices.CAEN_R8034.labscript_devices import CAEN, CaenAnalogOut
from user_devices.BS_cryo_old.models.BS_1_10 import BS_1_10
from user_devices.BS_cryo_old.models.BS_1_8 import BS_1_8
from user_devices.Stahl_HV.labscript_devices import Stahl_HV, AnalogOutStahl
from user_devices.BS_cryo.labscript_devices import BS_cryo
from labscript_devices.BS_Series.models.BS_341A_spec import BS_341A_spec
from labscript_devices.BS_Series.models.BS_341A import BS_341A

from user_devices.BNC_575.labscript_devices import BNC_575, PulseChannel

from user_devices.IDS_UI_5240SE.labscript_devices import IDS_UICamera, IDSVisibilityLevelType, TriggerEdgeType

from user_devices.PicoScope4000A.labscript_devices import PicoScope4000A, PicoAnalogIn
from user_devices.AlliedVision.labscript_devices import AlviumCamera, TriggerActivationType, AVVisibilityLevelType

from user_devices.logger_config import logger

def init_alvium():
    # camera_trigger = Trigger(name='camera_trigger', parent_device=pci_6259, connection='port0/line0')
    camera_trigger = None
    AlviumCamera(name='allied_vision', camera_id="0C9X6", parent_device=camera_trigger,  parentless=True, connection='trigger',
                 trigger_gpio=0, gain=10, exposure_time=0.005, framerate=10, manual_mode_gain=10, manual_mode_exposure_time=0.05,
                 orientation=None, trigger_activation=TriggerActivationType.FALLING_EDGE, visibility_level=AVVisibilityLevelType.EXPERT, stop_acquisition_timeout=5.0)

def init_BS_10(clockline):
    BS_cryo(name="BS_cryo_10CH", parent_device=clockline, ao_range=10, num_ao=10, port='/dev/pts/1', pre_programmed=False)
    AnalogOutStahl(name='BS_10_0', parent_device=BS_cryo_10CH, connection='ch 0', default_value=10)
    AnalogOutStahl(name='BS_10_1', parent_device=BS_cryo_10CH, connection='ch 1')
    AnalogOutStahl(name='BS_10_2', parent_device=BS_cryo_10CH, connection='ch 2')
    AnalogOutStahl(name='BS_10_3', parent_device=BS_cryo_10CH, connection='ch 3')
    AnalogOutStahl(name='BS_10_4', parent_device=BS_cryo_10CH, connection='ch 4')
    AnalogOutStahl(name='BS_10_5', parent_device=BS_cryo_10CH, connection='ch 5', ao_range=5)
    AnalogOutStahl(name='BS_10_6', parent_device=BS_cryo_10CH, connection='ch 6', ao_range=5)
    AnalogOutStahl(name='BS_10_7', parent_device=BS_cryo_10CH, connection='ch 7', ao_range=5)
    AnalogOutStahl(name='BS_10_8', parent_device=BS_cryo_10CH, connection='ch 8', ao_range=5)
    AnalogOut(name='BS_10_9', parent_device=BS_cryo_10CH, connection='ch 9')

def init_HV_200(clockline):
    # Stahl_HV(name="testing_HV_200", parent_device=clockline, ao_range=200, num_ao=8, serial_number='HV100')
    Stahl_HV(name="testing_HV_200", parent_device=clockline, ao_range=200, num_ao=8, port='/dev/pts/1')
    AnalogOutStahl(name='ch_1_200', parent_device=testing_HV_200, connection="ch 0", ao_range=180)
    AnalogOutStahl(name='ch_4_200', parent_device=testing_HV_200, connection="ch 4", ao_range=50)
    AnalogOutStahl(name='ch_5_200', parent_device=testing_HV_200, connection="ch 5")
    AnalogOutStahl(name='ch_8_200', parent_device=testing_HV_200, connection="ch 7", ao_range=200)

def init_HV_250(clockline):
    Stahl_HV(name="HV_250_testing", parent_device=clockline, port='/dev/pts/3', ao_range=250, num_ao=8)
    AnalogOutStahl(name='ch_1_250', parent_device=HV_250_testing, connection="ch 0", ao_range=180)
    AnalogOutStahl(name='ch_4_250', parent_device=HV_250_testing, connection="ch 4", ao_range=50)
    AnalogOutStahl(name='ch_5_250', parent_device=HV_250_testing, connection="ch 5")
    AnalogOutStahl(name='ch_8_250', parent_device=HV_250_testing, connection="ch 7", ao_range=200)

def init_CAEN_bipol(clockline):
    CAEN(
        name='CAEN_bipol',
        parent_device=clockline,
        # port='/dev/pts/1',
        vid="21e1",
        pid="0014",
        baud_rate=9600,
        bipol=True,
        ramp_up=10,
        ramp_down=10,
        timeout=10,
        threshold=6000,
        # decay_time=50*10e-3,
        decay_time=None,
        ch_num=8,
        output_voltage=6000,
        serial_number="63825",
        start_order=-1
    )
    # Make sure channels are enabled
    CaenAnalogOut(name='MCP_1', parent_device=CAEN_bipol, connection='ch 0', enable=True)
    CaenAnalogOut(name='PDT', parent_device=CAEN_bipol, connection='ch 1', enable=True)
    CaenAnalogOut(name='FC', parent_device=CAEN_bipol, connection='ch 2', enable=False)
    CaenAnalogOut(name='CC', parent_device=CAEN_bipol, connection='ch 3', enable=False)
    CaenAnalogOut(name='caen_4', parent_device=CAEN_bipol, connection='ch 4', enable=False)
    CaenAnalogOut(name='caen_5', parent_device=CAEN_bipol, connection='ch 5', enable=False)
    CaenAnalogOut(name='caen_6', parent_device=CAEN_bipol, connection='ch 6', enable=False)
    CaenAnalogOut(name='caen_7', parent_device=CAEN_bipol, connection='ch 7', enable=False)

def init_CAEN_sikler_lenses(clockline):
    CAEN(
        name='CAEN_sikler_lenses',
        parent_device=clockline,
        # port='/dev/pts/3',
        vid="21e1",
        pid="0014",
        baud_rate=9600,
        bipol=False,
        ramp_up=50,
        ramp_down=50,
        timeout=10,
        threshold=10,
        decay_time=None,
        ch_num=8,
        output_voltage=6000,
        serial_number="13469",
        start_order=-1
    )
    # Make sure channels are enabled
    CaenAnalogOut(name='sikler1_north', parent_device=CAEN_sikler_lenses, connection='ch 0', enable=True)
    CaenAnalogOut(name='sikler1_south', parent_device=CAEN_sikler_lenses, connection='ch 1', enable=True)
    CaenAnalogOut(name='sikler1_east', parent_device=CAEN_sikler_lenses, connection='ch 2', enable=True)
    CaenAnalogOut(name='sikler1_west', parent_device=CAEN_sikler_lenses, connection='ch 3', enable=True)
    CaenAnalogOut(name='sikler2_north', parent_device=CAEN_sikler_lenses, connection='ch 4', enable=True)
    CaenAnalogOut(name='sikler2_south', parent_device=CAEN_sikler_lenses, connection='ch 5', enable=True)
    CaenAnalogOut(name='sikler2_east', parent_device=CAEN_sikler_lenses, connection='ch 6', enable=True)
    CaenAnalogOut(name='sikler2_west', parent_device=CAEN_sikler_lenses, connection='ch 7', enable=True)


def init_picoscope_178():
    picoscope_178 = PicoScope4000A(name='picoscope_178',
                   serial_number='HO248/178',
                    sampling_rate=1e7, no_post_trigger_samples=100000,
                    source="channel_A", threshold=1.9, direction='falling', delay_samples=0,
                    auto_trigger_s=0,
                   )
    # 8 channels
    # name, parent_device, connection, enabled=[0,1], coupling=['ac', 'dc'], analog_offset_v=[0.1..200], analog_offset_v=float
    PicoAnalogIn(name='trigger_178', parent_device=picoscope_178, connection='channel_A', enabled=1, coupling='dc', range_v=5, analog_offset_v=0.0)
    PicoAnalogIn(name='PDT_CC', parent_device=picoscope_178, connection='channel_B', enabled=1, coupling='dc', range_v=0.5, analog_offset_v=0.0)
    PicoAnalogIn(name='FC', parent_device=picoscope_178, connection='channel_C', enabled=1, coupling='ac', range_v=1, analog_offset_v=0.0)
    PicoAnalogIn(name='CC_single', parent_device=picoscope_178, connection='channel_D', enabled=1, coupling='ac', range_v=0.2, analog_offset_v=0.0)
    PicoAnalogIn(name='CC2_e', parent_device=picoscope_178, connection='channel_E', enabled=1, coupling='ac', range_v=0.05, analog_offset_v=0.0)
    PicoAnalogIn(name='CC2_f', parent_device=picoscope_178, connection='channel_F', enabled=1, coupling='ac', range_v=0.05, analog_offset_v=0.0)
    PicoAnalogIn(name='CC2_g', parent_device=picoscope_178, connection='channel_G', enabled=1, coupling='ac', range_v=0.05, analog_offset_v=0.0)
    PicoAnalogIn(name='CC2_h', parent_device=picoscope_178, connection='channel_H', enabled=1, coupling='ac', range_v=0.05, analog_offset_v=0.0)

    #
    # picoscope_178.set_stream_sampling(sampling_rate=1e7, no_post_trigger_samples=600)
    # picoscope_178.set_simple_trigger(source="channel_A", threshold=1.9, direction='falling', delay_samples=0,
    #                                  auto_trigger_s=0)
    # picoscope_178.signal_generator_config(offset_voltage=0, pk2pk=2, wave_type='square')

def init_picoscope_173():
    picoscope = PicoScope4000A(name='picoscope_173', serial_number='HO248/173',
                               sampling_rate=1e7, no_post_trigger_samples=100000,
                               source="channel_A", threshold=1.9, direction='falling', delay_samples=0,
                               auto_trigger_s=0,
                               )
    # 8 channels
    # name, parent_device, connection, enabled=[0,1], coupling=['ac', 'dc'], analog_offset_v=[0.1..200], analog_offset_v=float
    PicoAnalogIn(name='trigger_173', parent_device=picoscope, connection='channel_A', enabled=1, coupling='dc', range_v=5, analog_offset_v=0.0)
    PicoAnalogIn(name='trap_electrode', parent_device=picoscope, connection='channel_B', enabled=1, coupling='dc', range_v=10, analog_offset_v=0.0)
    PicoAnalogIn(name='mcp_1_c', parent_device=picoscope, connection='channel_C', enabled=1, coupling='ac', range_v=10, analog_offset_v=0.0)
    PicoAnalogIn(name='mcp_1_d', parent_device=picoscope, connection='channel_D', enabled=1, coupling='ac', range_v=10, analog_offset_v=0.0)
    PicoAnalogIn(name='CC1_e', parent_device=picoscope, connection='channel_E', enabled=1, coupling='ac', range_v=0.01, analog_offset_v=0.0)
    PicoAnalogIn(name='CC1_f', parent_device=picoscope, connection='channel_F', enabled=1, coupling='ac', range_v=0.01, analog_offset_v=0.0)
    PicoAnalogIn(name='CC1_g', parent_device=picoscope, connection='channel_G', enabled=1, coupling='ac', range_v=0.01, analog_offset_v=0.0)
    PicoAnalogIn(name='CC1_h', parent_device=picoscope, connection='channel_H', enabled=1, coupling='ac', range_v=0.01, analog_offset_v=0.0)
    #
    # picoscope_173.set_stream_sampling(sampling_rate=1e7, no_post_trigger_samples=600)
    # picoscope_173.set_simple_trigger(source="channel_A", threshold=1.9, direction='falling', delay_samples=0,
    #                                  auto_trigger_s=0)
    # picoscope_173.signal_generator_config(offset_voltage=0, pk2pk=2, wave_type='square')

def init_IDS_UI_1():
    """Camera installed on 19.01.26"""
    IDS_UICamera(name='IDSCameraUI5240SE_1',
                 serial_number="4104540576",
                 # serial_number="4104380609",
                 visibility_level=IDSVisibilityLevelType.ADVANCED,
                 gain=3.5, exposure_time=0.05, roi=(0,0,1280,1024), frame_rate_fps=13,
                 acquisition_timeout=6)

def init_IDS_UI_2():
    """First camera"""
    IDS_UICamera(name='IDSCameraUI5240SE_2', serial_number="4104412217", visibility_level=IDSVisibilityLevelType.ADVANCED,
                 gain=3.5, exposure_time=0.05, roi=(0,0,1280,1024), frame_rate_fps=13,
                 acquisition_timeout=6)

def init_UM(clockline):
    # '/dev/ttyUSB0'
    UM(name='UM_ST', parent_device=clockline, port='/dev/ttyUSB0', baud_rate=9600)
    # Possible connections: "CH A'", "CH B'", "CH C'", "CH [1..10]"
    AnalogOut(name="UM_1", parent_device=UM_ST, connection="CH A'")
    AnalogOut(name="UM_2", parent_device=UM_ST, connection="CH B'")
    AnalogOut(name="UM_3", parent_device=UM_ST, connection="CH C'")

def init_BNC_575():
    # sudo dmesg | grep tty , '/dev/ttyUSB0'
    BNC_575(name='pulse_generator', port='/dev/pts/6', trigger_mode='DISabled')
    # Possible connections: "pulse [1..]"
    PulseChannel(name='pulse_1', connection='pulse 1', parent_device=pulse_generator, delay=1e-3, width=1, mode='SINGle')
    PulseChannel(name='pulse_2', connection='pulse 2', parent_device=pulse_generator, delay=1+2e-3, width=1, mode='SINGle')
    PulseChannel(name='pulse_3', connection='pulse 3', parent_device=pulse_generator, delay=2+2e-3, width=1, mode='SINGle')
    PulseChannel(name='pulse_4', connection='pulse 4', parent_device=pulse_generator, delay=2e-3, width=1)

def init_BS_10_old(clockline):
    BS_1_10(name='bias_supply_10', parent_device=clockline, port='/dev/pts/3', baud_rate=115200)
    AnalogOut(name='BS_110_analog_output_1', parent_device=bias_supply_10, connection='CH 1', default_value=2.22)
    AnalogOut(name='BS_110_analog_output_2', parent_device=bias_supply_10, connection='CH 4')
    AnalogOut(name='BS_110_analog_output_3', parent_device=bias_supply_10, connection='CH 3')
    AnalogOut(name='BS_110_analog_output_4', parent_device=bias_supply_10, connection='CH 2', default_value=3.33)

def init_BS_8_old(clockline):
    BS_1_8(name='bias_supply_8', parent_device=clockline, port='/dev/pts/4', baud_rate=115200)
    AnalogOut(name='BS_18_analog_output_1', parent_device=bias_supply_8, connection='CH 1', default_value=4.44)
    AnalogOut(name='BS_18_analog_output_2', parent_device=bias_supply_8, connection='CH 4')
    AnalogOut(name='BS_18_analog_output_3', parent_device=bias_supply_8, connection='CH 3')
    AnalogOut(name='BS_18_analog_output_4', parent_device=bias_supply_8, connection='CH 2', default_value=5.55)

def init_BS_341A_spec():
    BS_341A_spec(name='precision_voltage_source_for_ST', parent_device=clockline, port='/dev/pts/3', baud_rate=9600)
    AnalogOut(name='ao0_bs', parent_device=precision_voltage_source_for_ST, connection='CH 1', default_value=1.23)
    AnalogOut(name='ao1_bs', parent_device=precision_voltage_source_for_ST, connection='CH 2')

def init_BS_341A(clockline):
    BS_341A_spec(name='source_for_ST', parent_device=clockline, port='/dev/pts/3', baud_rate=9600)
    AnalogOut(name='ao0_bs_norm', parent_device=source_for_ST, connection='CH01', default_value=1.23)
    AnalogOut(name='ao1_bs_norm', parent_device=source_for_ST, connection='CH02')

def init_HV_200_8(clockline):
    HV_200_8(name="power_supply_for_ST", parent_device=clockline, port='/dev/pts/4')
    AnalogOut(name='AO_ST_1', parent_device=power_supply_for_ST, connection='CH 1', default_value=0)
    AnalogOut(name='AO_ST_2', parent_device=power_supply_for_ST, connection='CH 2', default_value=0)
    AnalogOut(name='AO_ST_3', parent_device=power_supply_for_ST, connection='CH 3', default_value=0)
    AnalogOut(name='AO_ST_4', parent_device=power_supply_for_ST, connection='CH 4', default_value=0)

def init_HV_250_8(clockline):
    HV_200_8(name="power_supply_for_CT", parent_device=clockline, port='/dev/pts/6')
    AnalogOut(name='AO_ST_1', parent_device=power_supply_for_CT, connection='CH 1', default_value=0)
    AnalogOut(name='AO_ST_2', parent_device=power_supply_for_CT, connection='CH 2', default_value=0)
    AnalogOut(name='AO_ST_3', parent_device=power_supply_for_CT, connection='CH 3', default_value=0)
    AnalogOut(name='AO_ST_4', parent_device=power_supply_for_CT, connection='CH 4', default_value=0)

def init_HV_500_8(clockline):
    HV_200_8(name="power_supply_for_E14", parent_device=clockline, port='/dev/pts/4')
    AnalogOut(name='AO_E14_1', parent_device=power_supply_for_E14, connection='CH 1', default_value=0)
    AnalogOut(name='AO_E14_2', parent_device=power_supply_for_E14, connection='CH 2', default_value=0)
    AnalogOut(name='AO_E14_3', parent_device=power_supply_for_E14, connection='CH 3', default_value=0)
    AnalogOut(name='AO_E14_4', parent_device=power_supply_for_E14, connection='CH 4', default_value=0)

def build_connectiontable():
    DummyPseudoclock('pseudoclock')
    clockline = pseudoclock.clockline

    #init_CAEN_bipol(clockline)
    init_CAEN_sikler_lenses(clockline)
    #
    init_picoscope_178()
    init_picoscope_173()

    #init_IDS_UI_1()

    # init_alvium()
    # init_BNC_575()
    # init_BS_10_old(clockline)
    # init_BS_8(clockline)
    # init_HV_250_8(clockline)
    # init_BS_341A(clockline)
    # init_UM(pseudoclock.clockline)
    # init_HV_200_8(clockline)
    # init_BNC_575()
    # init_IDS(camera_trigger)
    # init_HV_200(clockline)
    # init_HV_250(clockline)
    # init_BS_10(clockline)

    # CAEN(name='CAEN_111111',parent_device=clockline, port='/dev/pts/5',baud_rate=9600, )
    # CAEN(name='CAEN_222222',parent_device=clockline, port='/dev/pts/7',baud_rate=9600, )


if __name__ == '__main__':
    build_connectiontable()
    t = 0
    add_time_marker(t, "Start", verbose=True)
    start()
    # allied_vision.expose(t=t, name="ion_detect", frametype="ions", trigger_duration=0.001)
    t+=1
    # ch_1_250.constant(t=t, value=10)

    # ch_4_250.constant(t=t, value=10)
    # ch_5_250.constant(t=t, value=10)

    # BS 1-8:
    # BS_18_analog_output_1.constant(t=t, value=2.000)
    # BS_18_analog_output_2.constant(t=t, value=3.000)

    # BS=34-1a SPEC:
    # t += 1
    # ao_BS_1.constant(t=t, value=12)
    # ao_BS_2.constant(t=t, value=16)
    # ao_BS_3.constant(t=t, value=15)

    # UM:
    # t += 1
    # CRES_1.constant(t=t, value=-2)
    # CRES_2.constant(t=t, value=-15)
    # CRES_5.constant(t=t, value=-22)

    # BS=34-1a:
    # t += 1
    # ao0_bs_norm.constant(t=t, value=12)
    # t += 2
    # ao1_bs_norm.constant(t=t, value=16)
    # t += 1
    # ao0_bs_norm.constant(t=t, value=15)


    stop(t)