Needed Changes: - route all 12 bits of camera bus to PRU sanely. (currently weird) - default camera pin/SD jumpers to use camera ? (maybe?) - Test points on all boot pins - Bigger led resistors - Remove USB host power circuit and replace with jumper - Add direct i2c0, i2c2, and uart0 header breakouts - Used more resistor arrays - Test points on emmc signals - Connect boot select pin to OPD? - USB client vbus should have select jumper between actual connector and 5v - default jumper to boot emmc - use the bigger testpoints on important stuff - label camera control test points
Needed Changes: